Fascia board is the horizontal that is level plank over the edge of a roof. The fascia can be used to to install a gutter to the soffit and roofing panels beneath the the eaves, and is nailed to the ends of the roof rafters. It is possible to install vinyl trim on the fascia when installing vinyl siding in your house. By giving a contrast to the colour of the siding, while shielding the fascia board to the the weather, the trimming serves an aesthetic function.
Take away the gutter in the fascia where you are installing the trimming. In the event the gutter has a down spout in the finish, unscrew the down spout and eliminate it in the gutter. Unscrew the lag bolts that hold the gutter to the fascia. In the event that you plan to re-use it, manage the gutter with attention. Have an assistant or 2 allow you to take down the gutter.
If there is no gutter on the plank nail undersill trim to the very top of the fascia board. Place the undersill trim from the fascia board in order for the very top of the trimming is aligned with all the very top of the fascia board trim on the underside. Drive 4 d nails and to the fascia board every 3 feet over the period of the fascia. Bypass this stage, as you will make use of the gutter apron to fix the fascia trim, if there is a gutter on the fascia board.
An F-channel to the underside of the fascia board. Set the F-channel upside down using the slot facing in toward your house, against the underside of the fascia. Drive galvanized nails to the F-station through the slots and to the fascia every 3 feet.
Assess the space between the underside border of the F- the very top of the slot in the undersill trim and subtract 1/4 inch. as well as channel Make use of the tablesaw to slice the the fascia trimming to to suit this width. Wear security goggles when performing this.
Perforate tablatures to the very best of the fascia trimming having a snaplock punch. Set the 1/8 inch under the the leading border of the trimming, perforating one tab every 6″. Perforate the tabs in order that they extend out of the front facet of the fascia trim.
Lift the fascia trimming into place on the fascia board. Crochet the curled border along the underparts of the the fascia trimming to the station of the F station, and tuck the best border of the fascia trimming to the trim or the gutter apron. Overlap the edges by 1 1/2 inches. of bits
Corner bits for the fascia trimming. Cut a bit of fascia trimming which is 12 inches broad. Draw a-line down the middle of the trimming on the within edge. Cut a notch in the lip over the underside edge of the trimming using some of tin snips. The notch ought to be cut a-T 4 5 levels on each and every side to to make a 90-diploma angle when the trimming is folded. Hold a straight-edge in the middle of the notch, and fold the trimming right into a rightangle piece. Clout tablatures to the very best of the corner bit, putting one tab in the centre of every side.
Install the corner bits onto the fascia board utilizing precisely the same procedure you utilized when installing the fascia trimming. In the event that you’d one reinstall the gutter.