How to Prime Exterior Steel Pipe

Diligent prep function is required by priming an exterior steel pipe. Peeling paint and flaking rust should be scoured away, and grease and any grime should be cleaned off prior to implementing a rust- . A clear pipe using an exterior that is somewhat scuffed up gives the greatest area to. Exterior steel that is priming properly not only guarantees professional-looking outcomes but additionally protects pipes using a barrier from the elements.

Scrub the the surface metal pipe using a degreaser and steel-wool to remove dirt and oil residue, as well as flaking paint and rust.

The pipe using a power washer to eliminate all traces of the cleanser and residue. Wait for the pipe to dry before you go to another step.

Scrape any remaining pockets of rust off or clumped paint up using a wire brush. Wipe the particles using a tack cloth off.

Sand the the top of pipe with 120-grit sandpaper to scratch the surface for better adhesion in the primer up.

Stick painter’s tape onto places you do not want exposed to the primer. Cover the floor below the pipe using a dropcloth.

Coat the pipe with rust- primer. Support the the can 6 to 8″ away from your pipe if utilizing a spray primer, and use an even coating on the whole area. If using a brush- dip a paint brush to the can, and use a coat of primer over the whole area. Apply one more coat if specified on the label.

Wait for the primer to dry before implementing any exterior paint.

See related